Filter
Top Products
35
VQT2M75
Basic
Recording/
Playback
3
Recording motion
pictures
1 Change the mode to .
2 Open the LCD monitor or
extend the viewfinder.
3 Press the recording start/stop
button to start recording.
B When you begin recording, ;
changes to ¥.
4 Press the recording start/stop
button again to pause
recording.
≥ Still pictures can be recorded while recording the motion picture. (l 38)
≥ The images recorded between pressing the recording start/stop button to start recording
and pressing it again to pause recording become one scene.
≥ Maximum number of recordable scenes: 3900
Maximum number of different dates: 200 (l 90)
When either of them reaches to the maximum limit, additional scenes cannot be recorded.
(In the case of SD cards it is the maximum number of recordable scenes per card.)
≥ While recording is in progress, the recording will not stop even if the LCD monitor is closed
and the viewfinder is retracted.
≥ Put the unit in Pause mode when connecting or disconnecting an external microphone with
the MIC terminal.
≥ Align with the status indicator A.
HDC-TM700&HS700P&PC-VQT2M75_mst.book 35 ページ ２０１０年２月２３日 火曜日 午前１０時３４分