Filter
Top Products
76
VQT2M75
Parts where white saturation (color saturation) is likely to
occur (extremely brightly lit or shiny parts) are displayed with
diagonal lines (zebra pattern).
≥ Change the mode to or .
≥ Switch to Manual Mode. (l 82)
≥ You can record an image with little white saturation if you
manually adjust the shutter speed or brightness (iris/gain) (l 84).
≥ The zebra pattern does not appear on the images actually recorded.
Displays the luminance level of the center of the screen (luminance display frame) in %.
It makes the adjustment of the brightness of the object easier, by checking the luminance
level of the object, when recording same object in different surroundings.
Adjust the brightness using [IRIS]. (l 84)
≥ Change the mode to or .
≥ Switch to Manual Mode. (l 82)
≥ Luminance level is displayed between [0%] and [99%]. It will be displayed as [99% ] when
it is over 99%.
≥ Luminance is displayed while adjusting [IRIS] even if [DISPLAY] is set to [OFF].
[ZEBRA]
: [RECORD SETUP] # [ZEBRA] # [ON]
≥ It is possible to set from the quick menu in Manual
Mode. (l 45)
[LUMINANCE]
: [RECORD SETUP] # [LUMINANCE] # desired setting
≥ It is possible to set from the quick menu in Manual Mode. (l 45)
[OFF]:
Cancel the setting.
[ALWAYS]:
Constantly display.
[ON ADJUST]:
Display only when [IRIS] is adjusted. (l 84)
A Luminance display frame
B Luminance level
A Zebra pattern
50%
HDC-TM700&HS700P&PC-VQT2M75_mst.book 76 ページ ２０１０年２月２３日 火曜日 午前１０時３４分