Filter
Top Products
61
VQT2M75
When a smiling face is detected during motion picture recording, the unit
automatically records a still picture.
The icon changes each time it is touched.
(ON) # (Face Recognition) # OFF
: The unit records a still picture on detecting a smiling face.
: Still pictures are only recorded when the face of a person registered using Face
Recognition
(
l 68
)
is detected.
OFF: Cancel the setting.
≥ During smile shot recording, / are red and the face detected as a smiling face is
surrounded by a green frame.
≥
does not function when [FACE RECOG.] is [OFF] or no one is registered.
≥ The face of the subject may not be detected correctly depending on the recording
conditions.
≥ The number of recording pixels are (4864k2736), (3840k2160) or
(1920k1080). (l 78)
≥ When still pictures that have been recorded using the Smile Shot are displayed as
thumbnails, the appears.
≥ When the AF/AE tracking function is target locking a face of the subject, still pictures are
only recorded if a smile is detected on the locked subject. When the Smile Shot function is
set to (Face Recognition), it will record only if the face of a subject registered with
[FACE RECOG.] is locked as a target.
When the button is pressed, the flash is activated and the picture will be
recorded. Use the Built-in flash in order to record still pictures in dark places.
Each time the ß icon is selected, the indication changes by one setting in the following order:
ß ([ON]) # ßA ([AUTO]) # ([OFF])
≥ When the button is pressed halfway, the flash indicator will appear.
≥ The unit automatically determines if the flash is necessary even when it has been set to
by detecting the ambient brightness. (If it determines that the flash is necessary, the
indication lights up in red when the button is pressed halfway.)
∫ To adjust the brightness of the flash
: [PICTURE] # [FLASH LEVEL] # desired setting
[ßj]: Less bright
[ßd0]: Normal
[ßi]: Much brighter
≥ Set the flash to where using a flash is
prohibited.
≥ The light from the flash may be blocked by
the lens hood when the lens hood is
attached.
≥ Do not use the flash with the ND filter
(optional) or the conversion lens (optional)
attached.
Smile shot
Built-in flash
13.3
M
8.3
M
2.1
M
HDC-TM700&HS700P&PC-VQT2M75_mst.book 61 ページ ２０１０年２月２３日 火曜日 午前１０時３４分