Panasonic HDC-HS700P/PC Camcorder User Manual


 
140
VQT2M75
If scenes do not change smoothly when played back on another device
The images may be still for several seconds at the joins between the scenes if the following
operations are performed when multiple scenes have been continuously played back using
another unit.
Just how smoothly the scenes will be played back depends on the playback unit.
Depending on the unit used, the images may stop moving and become still for a moment
even when none of the following conditions are applicable.
A continuous recording of motion picture data that exceeds 4 GB may momentarily stop at
every 4 GB of data when played back with another device.
It may not play back smoothly when the editing of scenes was done with
the HD Writer AE 2.1, but it will play back smoothly if you set the seamless settings in the
HD Writer AE 2.1. Refer to the operating instructions for the HD Writer AE 2.1.
Principal reasons for not playing back smoothly
When the scenes were recorded on different dates
When scenes lasting under 3 seconds have been recorded
When PRE-REC was used for recording
When the Interval recording is used
When deleting scenes
When selected scenes are copied between an SD card and the built-in memory/
HDD
When selected scenes are copied to a disc in a connected DVD burner.
When scenes recorded with more than 99 scenes on the same date
HDC-TM700&HS700P&PC-VQT2M75_mst.book 140 ページ 2010年2月23日 火曜日 午前10時34分