Filter
Top Products
138
VQT2M75
Object seems to be
warped.
≥ Object seems to be warped slightly when the object
moves across the image very fast, but this is
because the unit is using MOS for the image sensor.
This is not a malfunction.
White round spots like
soap bubbles appear
on the recorded
picture.
≥ If you take a picture
with the flash in a dark
place or indoors, white
round spots may
appear on the picture
caused by the flash
reflecting of particles of dust in the air. This is not a
malfunction.
A characteristic of this is that the number of round
spots and their position differ in every picture.
“ERROR OCCURRED.
PLEASE TURN UNIT
OFF, THEN TURN ON
AGAIN.” is displayed.
≥ The unit has automatically detected an error. Restart
the unit by turning the power off and on.
≥ The power will be turned off in about 1 minute if the
power is not turned off and on.
≥ Repair is needed if it is repeatedly displayed even if
it is restarted. Detach the power connected, contact
consumer support. (l 161, 162) Do not attempt to
repair the unit by yourself.
VIERA Link does not
work.
[Setting on this unit]
≥ Connect with a HDMI mini cable (optional). (l 105)
≥ Press the MENU button, then touch [SETUP] #
[VIERA Link] # [ON]. (l 105)
≥
Turn the power to the unit off and then back on again.
[Setting on other devices]
≥ If the TV input does not switch automatically, switch
the input using the TV remote control.
≥
Check the VIERA Link setting on the connected device.
≥ Please refer to the operating instructions of the
connected device.
Problem Check points
HDC-TM700&HS700P&PC-VQT2M75_mst.book 138 ページ ２０１０年２月２３日 火曜日 午前１０時３４分