Filter
Top Products
20. Others
186
∫ Recording
The picture cannot be recorded.
≥ Is there any memory remaining on the built-in memory or the microSD card?
> Delete the pictures which are not necessary to increase available space in the memory. (P126)
≥ You may not be able to record for a short while after turning this unit on when using a large capacity microSD card.
The recorded picture is whitish.
≥ Picture might look whitish when lens gets dirty with fingerprints or similar.
> If the lens is dirty, lightly wipe the surface with a soft, dry cloth.
The recorded picture is too bright or dark.
≥ Check that the exposure is correctly compensated. (P86)
≥ Is the AE Lock (P117, 121) applied incorrectly?
Multiple pictures are taken at one time.
≥ Cancel the following settings:
– [Burst]/[Auto Bracket] (P96)
The subject is not focused properly.
≥ The subject is beyond the focus range of the unit.
≥ There is camera shake (jitter) or the subject is moving slightly.
≥ Is the AF Lock (P117, 121) applied incorrectly?
The recorded picture is blurred.
≥ The shutter speed becomes slower when pictures are taken in dark places so hold the unit firmly with both hands to
take the pictures. (P40)
≥ When taking pictures at a slow shutter speed, use the Self-timer. (P100)
The recorded picture looks rough.
Noise appears on the picture.
≥ Try the following:
> Take pictures in bright places.
> Decrease the ISO sensitivity. (P87)
> Increase the setting for [Noise Reduction] in [Photo Style] or lower the setting for each of the items other than
[Noise Reduction]. (P102)
> Is the [Picture Size] (P104) or the [Quality] (P105) set low?
Striping or flicker may appear under lighting such as fluorescent lighting and LED lighting fixture.
≥ This is characteristic of MOS sensors which serve as the unit’s pickup sensors.
This is not a malfunction.
> Lowering the shutter speed may reduce the effect of the horizontal stripes.