Filter
Top Products
156
8
Settings
You can change the setting of the image folder name from the standard
name to the date the picture was taken. When the name setting is
changed to the date, pictures are saved in separate folders by the date
the pictures were taken.
Image Folder Name
1 Select [Folder Name] on the [B Set-up] menu.
2 Press the four-way controller (5).
A pull-down menu appears.
3 Use the four-way controller (23) to select [Standard]
or [Date].
4 Press the shutter release button halfway.
The Folder Name setting is saved and the screen returns to capture
status. Refer to Step 6 of “How to Use the Menus” (p.43) for other
operations after the setting has been made.
Changing the Image Folder Name
Standard XXXPENTX (where XXX is the 3-digit folder number)
Date XXX_mmdd (3-digit folder number_month day)
3 button
4 button
How to recall the [B Set-up] menu
Shutter release button
MENU
Four-way controller
DCIM
100PENTX
101_0825
102_0903
DCIM
100PENTX
101_0825
DCIM
100PENTX
Picture taken with
standard folder name
(Example: August 25)
Folder name changed
to date setting
(Example: August 25)
Next time a picture is taken
(Example: September 3)