Filter
Top Products
96
4
Taking Pictures
5 When the white balance is set to J
(Fluorescent Light), use the four-
way controller (45) to select
[W (white)], [D (daylight)] or
[N (neutral)].
6 Press the shutter release button
halfway.
The White Balance setting is saved and the screen returns to capture
status. Refer to Step 6 of “How to Use the Menus” (p.43) for other
operations after the setting has been made.
Have a blank sheet of white paper ready.
1 Select K (manual) on the White Balance screen.
2 Point the camera at the blank
sheet of paper so that it fills the
screen of the LCD monitor.
3 Press the shutter release button
fully.
The white balance is automatically
adjusted.
4 Press the 4 button.
The setting is saved and the screen returns to the [A Rec. Mode]
menu.
5 Press the 3 button.
The camera is ready to take pictures.
Saving the White Balance 1p.107
Auto Bracketing 1p.63
Manual Setting
Any changes made to the White Balance setting are invalid in d
mode.
OKMENU
WW
OK
OK
Cancel
Cancel
OKCancel
White Balance
OKMENU
SHUTTER
WW
OK
OK
Cancel
Cancel
OKCancel
White Balance
Adjust
Adjust
Adjust