Filter
Top Products
158
8
Settings
You can customize two user settings to determine the information
displayed on the LCD monitor during still image shooting.
When shipped from the factory, Setting 1 is set to full display and Setting
2 is set to display no information.
Refer to p.181 for information that can be displayed.
1 Select [DISPLAY] on the [B Set-up] menu.
2 Press the four-way controller (5).
The Capture Mode Information Display screen appears.
3 Use the four-way controller (23)
to select [1] or [2] and press the
four-way controller (5).
The Setting 1 Setting screen appears when
[1] is selected.
The Drive mode icon is surrounded by a
frame.
4 Use the 4 button to hide or
display the icon in the frame.
5 Use the four-way controller
(2345) to move the frame.
6 Repeat Steps 4 and 5 above to
customize the display information.
7 Press the shutter release button
halfway.
The Capture Mode Information Display setting is saved and the screen
returns to capture status. Refer to Step 6 of “How to Use the Menus”
(p.43) for other operations after the setting has been made.
Customizing the Display Mode
Displaying Shooting Information in Capture Mode
1
p.81
3 button
4 button
How to recall the [B Set-up] menu
Shutter release button
MENU
Four-way controller
38
38
38
200
200
ISO
ISO
200
ISO
14:25
14:25
14:25
OK
MENU
3056
Switch info
Switch info
Switch info
F5.6
F5.6
F5.6
1/250
1/250
1/250
09/25/2004
09/25/2004
09/25/2004
38
38
38
200
200
ISO
ISO
200
ISO
14:25
14:25
14:25
OK
MENU
3056
Switch info
Switch info
Switch info
F5.6
F5.6
F5.6
1/250
1/250
1/250
09/25/2004
09/25/2004
09/25/2004