Filter
Top Products
77
4
Taking Pictures
G
3D pictures can be taken in which two pictures placed side-by-side can
be viewed using a special method to produce a three-dimensional image.
You can take 3D pictures and view them by the parallel method or cross
method. The default setting is [Parallel]. Refer to “Selecting the Viewing
Mode” (p.78) for instructions on taking pictures by the cross method.
1 Set the mode dial to G.
The screen for taking the first image appears on the left of the LCD
monitor.
2 Take the first image.
Hold the camera so that the subject is in the
middle of the left half of the screen and
press the shutter release button. The image
appears in the left half of the LCD monitor.
The right half of the screen is for taking the
second image.
3 Move the camera to the right
without changing your stance.
4 Take the second image.
Make sure that the subject is in the middle
of the right half of the screen and press the
shutter release button.
To cancel the 3D Image mode, set the
mode dial to any mode other than G.
Taking 3D Pictures (3D Image Mode)
In 3D Image mode, the image is saved as C (JPEG) even when
the quality level is set to TIFF.
2, 4
1