Filter
Top Products
61
4
Taking Pictures
E a b c R d D C
In Self-Timer mode, the picture is taken ten seconds or two seconds
after the shutter release button is pressed.
Use the ten-second self-timer when you want to be included in a group
picture.
Use the two-second self-timer to avoid camera shake when you press
the shutter release button.
1 Press the ( button in Capture mode to display g on
the LCD monitor.
Depending on the previous setting, g or Z appears.
2 Press the shutter release button
fully.
g
The picture is taken approximately ten
seconds after the shutter release button
is pressed. The self-timer lamp lights for
about seven seconds, then blinks for
about three seconds.
Z The self-timer lamp blinks for about two
seconds after the shutter release button is pressed and the picture
is taken.
Using the Self-Timer
Focusing may be compromised if you move the camera while the
self-timer lamp is blinking when taking still pictures. (1p.84)
•In C mode, recording movies will start after ten seconds (or two
seconds).
• Press the shutter release button halfway while the self-timer is
engaged to cancel the self-timer. Press the shutter release button
fully to reset the self-timer to ten seconds (or two seconds).
Troubleshooting 1p.187
1
2
38
38
38
14
14
:25
:25
14:25
09/25/2004
09/25/2004
09/25/2004