Filter
Top Products
37
2
Getting Started
Attaching the Lens
All camera exposure modes are available when using DA, D FA, FA J or
other lenses with Aperture s (Auto) position. Some functions are
restricted when lenses are not set to Aperture s (Auto). Also see “Notes
on [Using Aperture Ring]” (p.184). Other lenses and accessories will not
be available with factory default settings. To allow shutter release with
lenses or accessories not listed above, set [Using aperture ring] in custom
function settings. (p.103)
1
Check that the camera is off.
2
Remove the body mount cover
(1) and lens mount cover (2).
Be sure to put the lens down with the
lens mount side facing upward to
protect from damage to the area
around the lens mount after removal.
3
Align the red dots on the
camera and the lens, and
secure by turning the lens
clockwise until it clicks.
After attaching, check that the lens is
secured. Also check that the red dots of
the lens are on top and attachment
portion does not move sideways.
Turn the camera off before attaching or removing the lens to prevent
unexpected lens m ovement.