Filter
Top Products
104
Shooting Functions
4
N Spot Metering
The brightness is measured only within a
limited area at the center of the
viewfinder. You can use this in
combination with the AE Lock (p.107)
when the subject is extremely small and
the correct exposure is difficult to obtain.
Center-weighted metering mode is automatically set even if you select multi-
segment metering mode when using a lens other than a DA, DA L, D FA, FA J,
FA, F or A lens, or when the lens aperture ring is set to a position other than s
(Auto). (Can only be used if [27. Using Aperture Ring] (p.299) in the [A Custom
Setting 4] menu is set to [Permitted].)
Linking AE to AF Point during Multi-segment
Metering
In [6. Link AE to AF Point] of the [A Custom Setting 1] menu, you can
link the exposure and AF point in the focusing area during multi-
segment metering.
1
Off Exposure is set separately from the AF point. (default setting)
2
On Exposure is set in accordance with the AF point.
Setting the Meter Operating Time
You can set the exposure metering time to [10 sec.] (default setting),
[3 sec.] or [30 sec.] in [4. Meter Operating Time] of the [A Custom
Setting 1] menu.