Pentax K-5 IIs Digital Camera User Manual


 
194
Shooting Settings
6
1
Select [Lens Correction] in the [A Rec. Mode 1] menu and
press the four-way controller (5).
The [Lens Correction] screen appears.
2
Use the four-way controller (23) to select [Distortion
Correction] or [Lat-Chromatic-Ab Adj].
3
Press the four-way controller (5)
and use the four-way controller
(23) to select [OFF] or [ON].
4
Press the 4 button.
5
Press the 3 button twice.
The camera is ready to take a picture.
Corrections can only be made when using DA, DA L, D FA or some FA
lenses. [Lens Correction] cannot be selected when an incompatible lens is
attached. (p.297)
The Lens Correction function is disabled when using an accessory such as a
close-up ring or rear converter that is attached between the camera and the
lens.
When the Lens Correction function is activated, it may take longer to display
Instant Review and the shooting speed for continuous shooting may be
slower.
The effect of the Lens Correction function may be barely noticeable in some
cases due to the shooting conditions or other factors.
When a compatible lens is attached and the file format is set to [RAW] or
[RAW+], the correction information is saved as a RAW file parameter and you
can select [On] or [Off] when developing the RAW images. (p.238)
Lens Correction
Distortion Correction
Lat-Chromatic-Ab Adj
Cancel OK
OK
MENU
OFF
OFF
ON
ON