Filter
Top Products
125
Shooting Functions
4
1
Make sure that [Shake Reduction] is set to k (On) and
turn the camera off.
Refer to “Reducing Vertical and Horizontal Camera Shake” (p.122) for
details.
2
Attach a lens and turn the camera on.
The [Input Focal Length] screen appears.
3
Turn the rear e-dial (S) to set
the focal length.
Select from the following focal length
values. (The default setting is 35 mm.)
4
Press the 4 button.
The camera is ready to take a picture.
8 101215182024283035
40 45 50 55 65 70 75 85 100 120
135 150 180 200 250 300 350 400 450 500
550 600 700 800
• If the focal length for your lens is not listed above, select the value closest to
the actual focal length (example: [18] for 17 mm and [100] for 105 mm).
• When using a zoom lens, select the actual focal length at the zoom setting
being used.
To change the focal length setting, use [Input Focal Length] in the [A Rec.
Mode 4] menu.
Shooting with Self-timer
g
Self-timer
(12 sec.)
Shutter is released after about 12 seconds. Use this mode to
include the photographer in the picture.
Z
Self-timer
(2 sec.)
A mirror pops up immediately after the shutter release button is
pressed. The shutter is released after about 2 seconds. Use this mode
to avoid camera shake when the shutter release button is pressed.
Cancel OK
OK
MENU
Input Focal Length
135
120
100