Pentax K-5 IIs Digital Camera User Manual


 
142
Shooting Functions
4
5
Use the four-way controller (23)
to select the bracketing amount
and press the 4 button.
Select [±1] (default setting), [±2], [±3] or
[±4].
For [White Balance], select from [BA±1]
(default setting), [BA±2], [BA±3], [GM±1],
[GM±2] or [GM±3].
6
Press the 3 button twice.
The camera returns to Capture mode.
7
Press the shutter release button halfway.
The autofocus system operates.
8
Press the shutter release button fully.
Three images are saved.
Exposure Bracketing and Extended Bracketing can be used at the same
time. When used at the same time, each time the shutter is released for
Exposure Bracketing, three images with Extended Bracketing applied are
saved.
Parameters that cannot be set due to the image finishing tone setting of
Custom Image also cannot be set for Extended Bracketing. (Example: When
set to [Monochrome], Saturation and Hue cannot be selected for Extended
Bracketing) (p.197)
When [Fine Sharpness] or [Extra Sharpness] is set for Custom Image, the
sharpness of Extended Bracketing operates as Fine Sharpness or Extra
Sharpness.
When [Contrast] is set for Custom Image, the contrast of Extended
Bracketing operates according to the [Contrast] setting.
Extended Bracketing
Saturation
Bracketing Amount
Cancel OK
OK
MENU
±1
±2
±3
±4