Filter
Top Products
67
Basic Operations
3
3
Look through the viewfinder to
view the subject.
A zoom lens can be used to change the
size of the subject in the viewfinder. (p.68)
4
Position the subject inside the AF frame and press the
shutter release button halfway.
The autofocus system operates.
The focus indicator ] appears and you
will hear a beep when the subject comes
into focus (focus lock).
The AF assist light turns on in a dark or
backlit location, but the flash does not pop
up automatically. If the flash is necessary,
the flash status E blinks in the viewfinder.
Press the E button to pop up the flash.
1Using the Built-in Flash (p.69)
1Selecting the Focusing Area (AF Point) (p.113)
5
Press the shutter release button fully.
The picture is taken.
This action is referred to as “releasing the shutter” or “release”.
6
Review the captured image on the monitor.
The image appears for 1 second on the monitor shortly after capturing
(Instant Review).
1Setting the Display for Instant Review (p.259)
You can magnify the image during Instant Review with the rear e-dial
(S). (p.211)
You can delete the image during Instant Review by pressing the i
button.
1Deleting a Single Image (p.74)
Focus indicator
Flash
status