Pentax K-5 IIs Digital Camera User Manual


 
167
Using the Flash
5
Using an External Flash (Optional)
Using an optional external flash AF540FGZ, AF360FGZ, AF200FG or
AF160FC enables a variety of flash modes such as P-TTL auto flash mode.
(z: Available #: Restricted ×: Not available)
*1 Available only when using a DA, DA L, D FA, FA J, FA, F or A lens.
*2 Shutter speed of 1/90 sec. or slower.
*3 When combined with the AF540FGZ or AF360FGZ, 1/3 of the flash discharge can be
output by the built-in flash and 2/3 can be output by the external flash.
*4 Available only when combined with the AF540FGZ or AF360FGZ.
*5 Multiple AF540FGZ or AF360FGZ units, or a combination of an AF540FGZ or AF360FGZ
unit and the built-in flash is required.
Flash
Camera Function
Built-in
Flash
AF540FGZ
AF360FGZ
AF200FG
AF160FC
Red-eye reduction flash zz z
Auto flash discharge zz z
After the flash is charged, the camera
automatically switches to the flash sync
speed.
zz z
Aperture value is automatically set in e
mode and b mode.
zz z
P-TTL auto flash (appropriate sensitivity:
ISO 100 to 3200)
z
*1
z
*1
z
*1
Slow-speed Sync zz z
Flash exposure compensation zz z
AF assist light of external flash × z ×
Trailing Curtain Sync
*2
zz ×
Contrast-control-sync flash mode #
*3
z #
*4
Slave flash × z ×
High-speed flash sync × z ×
Wireless flash #
*4
z
*5
×
Flashes with reversed polarity (the center contact on the hot shoe is minus)
cannot be used due to the risk of damaging the camera and flash.
Do not combine with accessories that have a different number of contacts,
such as a Hot Shoe Grip, as a malfunction may occur.
Combining with flashes from other manufacturers may cause equipment
breakdown. We recommend using the AF540FGZ, AF360FGZ or AF200FG.