Filter
Top Products
127
Shooting Functions
4
The shutter can be released from a distance by using the optional remote
control unit.
1
Mount the camera onto a tripod.
2
Press the four-way controller (2) in Capture mode.
The [Drive Mode] screen appears.
• Select a mode other than g or Z in the [Drive Mode] screen to cancel the
Self-timer shooting. The setting is canceled when the camera is turned off if
[Drive Mode] is set to P (Off) in [Memory] of the [A Rec. Mode 5] menu.
(p.274)
• The Shake Reduction function is automatically turned off when g or Z is set.
• You can set the camera so that the beep does not sound. (p.252)
• The exposure may be affected if light enters the viewfinder. Use the AE Lock
function (p.107) or attach the provided ME viewfinder cap. The light entering
the viewfinder has no effect on the exposure when the exposure mode is set
to a (Manual Exposure).
Shooting with Remote Control (Optional)
h
Remote Control
The shutter is released immediately after the shutter
release button on the remote control unit is pressed.
i
Remote Control
(3s delay)
The shutter is released about 3 seconds after the shutter
release button on the remote control unit is pressed.
i
Remote
Continuous
Shooting
Continuous shooting starts when the shutter release
button on the remote control unit is pressed. Press the
shutter release button on the remote control unit again to
exit continuous shooting.
Removing the Eyecup FR Attaching the ME Viewfinder cap