Pentax K-5 IIs Digital Camera User Manual


 
192
Shooting Settings
6
2
Press the four-way controller (5)
and use the four-way controller
(23) to select [Off], [Auto],
[Standard], [Strong 1], [Strong 2]
or [Strong 3].
3
Press the 4 button.
4
Use the four-way controller (23) to select [Auto Align]
and use the four-way controller (45) to select P or O.
5
Press the 3 button twice.
The camera is ready to take a picture.
P
[Shake Reduction] is fixed to l (Off). Use a tripod to prevent
camera shake when taking pictures. (default setting)
O
The Shake Reduction function operates according to the Shake
Reduction setting at that point. HDR Capture can be used without a tripod.
[Program Line] (p.89) is fixed to l (Hi-speed Priority) and [AUTO
ISO Parameters] (p.84) is fixed to a (Fast).
During HDR Capture, pressing the 3 button while an image is being
saved cancels the process and saves the image as a standard image.
When both [Shake Reduction] and [Auto Align] are set to on, be careful of the
following points.
- Make sure to hold the camera firmly so that the composition of the picture
does not change while the three images are taken. If there is a great
difference of the composition between three images, [Auto Align] may not
be possible.
- Images taken with HDR Capture are susceptible to camera shake and blur.
Be sure to set a higher shutter speed and a higher ISO sensitivity.
- When the exposure mode is set to e (Program Automatic Exposure),
[Program Line] is set to l (Hi-speed Priority).
- When the ISO sensitivity is set to [ISO AUTO], the sensitivity can be raised
more easily than normal.
- [Auto Align] may not be possible for lenses that have a focal length
exceeding 100 mm.
- When the entire subject is checkered or has a uniform surface, [Auto Align]
may not be possible.
HDR Capture
Auto Align
HDR Capture
Cancel OK
OK
MENU
HDR
HDR
AUTO
AUTO
HDR
HDR
OFF
OFF
HDR
HDR
HDR
HDR
HDR
HDR
HDR
HDR