Filter
Top Products
MANUAL FUNCTION TEST SEQUENCE
Test Mode Action Shutter Response
S6/S7 Close S6/S7
Press and release S1
button to check for
mechanical binding.
Observe current drain.
No reaction (Blades open, motor off)
AMBIENT Exposure
Mode
Remove ash array from
shutter.
Close S1
Open S5
Open S1
Open S3
Close S3
Close S5
Blades close; motor runs
Blades close; motor brakes
Blades close; motor brakes (no reaction)
Blades open then close; motor runs (exposure
time dependent on amount of light to seen by
photocell)
Blades close; motor runs
Blades open; motor brakes
S8 Dark Slide eject mode
(Flash Array inserted)
Close S8
Close S6/S7
Open S5
Open S3
Close S3
Open S8
Close S5
Blades open; motor brakes (no reaction)
Blades close; motor runs
Blades close; motor runs
Blades close; motor runs; no ash
Blades close; motor runs
Blades close; motor runs
Blades open; motor brakes
Flash Mode - ash array
inserted into shutter
Close S1
Open S5
Open S1
Open S3
Close S3
Close S5
Open F1 thru F5
consecutively, repeating
above test between each
switch opening.
Blades close; motor runs
Blades close; motor brakes
Blades close; motor brakes (no reaction)
Blades open then close (small aperture) ash
res; motor runs
Blades close; motor runs
Blades open; motor brakes
Bulbs re insequence
S9 - Empty lm pack
mode
Close switches F1 thru F5
Close S9
Close S1
Open S5
Open S1
Open S3
Close S3
Close S5
Blades open; motor brakes (no reaction)
Blades close; motor runs
Blades close; motor brakes
Blades close; motor brakes (no reaction)
Blades open then close (xed time) no ash;
motor runs
Blades close; motor runs
Blades open; motor brakes