Ricoh CAMERA RDC-i500 Digital Camera User Manual


 
114
Changing the Video-out Signal Method (NTSC/PAL)
If you wish to play recorded files on a TV when you are abroad, change the
Video-out Signal Method according to the video system used in the country
where you are.
See
•“Playback Using a TV (P.86) for instructions on how to connect the
camera to a TV
•“Using Your Camera in Other Countries (P.133) for details of the TV
systems
A Set the mode dial to [ ].
B Select [CAMERA SETTINGS] and
press the button.
C Select [VIDEO OUT MODE] and press
the button.
D Choose the video format (NTSC or
PAL) and then press the ENTER
button.
The video signal method will be changed and
the display will return to the Camera Settings
menu.
E Press the CANCEL button to return to
the Setup menu.
Note
Connecting the AV cable to the camera, when the signal method is set
to PAL, produces the rough image on the LCD monitor.