Filter
Top Products
118
D Choose the power setting (YES or
NO) and then press the ENTER
button.
If you select [YES], the camera will turn on
when the LCD monitor is opened.
E Press the CANCEL button to return to
the Setup menu.
Note
• To turn the power off, press the power switch.
• The power setting will be reset to the factory default (NO) when you
remove or replace the battery. You can restore the set value by turning
the power on again.
Initializing the Settings
This function enables you to reset all the settings and return them to their
factory default settings.
Important
Note
• Intializing all the settings will also erase the information and images in
the internal memory.
A Set the mode dial to [ ].
B Select [CAMERA SETTINGS] and
press the button.
C Select [INITIALIZE] and press the
button.