Ricoh CAMERA RDC-i500 Digital Camera User Manual


 
75
3
Shooting
D Press the CANCEL button to exit the
menu display.
AB will be displayed on the LCD monitor.
E Press the shutter release button to
record the image.
When the shutter release button is pressed,
three frames will be taken in succession at
0.5 EV, 0 and +0.5 EV, based on the preset
exposure compensation value.
Note
Auto Bracket cannot be used when the image quality mode is set on
non-compressed mode (NC) or when [VOICE MEMO] is set on [ON].
The flash does not fire in auto bracket mode.
Changing the ISO Sensitivity (ISO Setting)
You can change the ISO sensitivity.
A Set the mode dial to [ ] or [ ] and
press the MENU button.
B Select [ISO SETTING] and then press
the button.