Ricoh CAMERA RDC-i500 Digital Camera User Manual


 
71
3
Shooting
Shooting in Sharpness Mode (Sharpness)
This mode enables you to adjust the sharpness of the contours of the subject in
three stages (1, 0 and +1).
A Set the mode dial to [ ] and press
the MENU button.
B Select [SHARPNESS] and press the
button.
C Choose the desired level (1 or +1)
and then press the ENTER button.
If you select 1, the image will be recorded
with soft contours. If you select +1, the image
will be recorded with sharp contours.
Note
To cancel the sharpness mode,
select [OFF].
D Press the CANCEL button to exit the
menu display.
E Press the shutter release button to
record the image.
Note
Enable the keep settings mode to save the sharpness mode setting.
P.108 Keep Settings