Ricoh CAMERA RDC-i500 Digital Camera User Manual


 
32
Setting the Date and Time
Set the date and time. You can set the date in two patterns, HOME and
DESTINATION, and switch the pattern when you travel across the time zone.
A Select [HOME DATE/TIME] or
[DESTINATION DATE/TIME] and press
the button.
B Set the date and time and then press
the ENTER button.
Specify which date you will use, HOME
DATE/TIME or DESTINATION DATE/TIME,
by Selecting the Date To Be Used (See
below).
See
P.29 How to Use the Spin Box ( )
C Press the ENTER button.
The display will return to the Camera
Settings menu.
Press the CANCEL button to return to the
Setup menu.
Note
The date and time settings are reset if the battery has been removed
for about 20 days, as at replacement. Set the date and time again.
Selecting the Date To Be Used
Select the date you wish to use, HOME DATE/TIME or DESTINATION DATE/
TIME. It will be used for the camera information (Recording or sending date and
time, etc.).
A Select [DATE TO BE USED] and press
the button.