Filter
Top Products
English - 140
Wall Mount Kit Specications (VESA)
Install your wall mount on a solid wall perpendicular to the oor. When attaching to other building materials, please contact
your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
Product Family inches, model VESA Spec. (A * B) Standard Screw Quantity
LCD-TV
23~ 26 200 * 100 M4
4
32 ~ 40 200 * 200 M6
LN46A850S1F,
LN46A860S2F,
LN52A850S1F,
LN52A860S2F
400 * 400
M8
57 700 * 400 (No VESA)
57 ~ 70 800 * 400
80 ~ 1400 * 800
PDP-TV
42 ~ 50 600 * 400
M8
4
55 ~ 70 800 * 400
63 No VESA 6
80 ~ 1400 * 800 4
Standard dimensions for wall mount kits are shown in the table above.
When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.
Do not use screws longer than the standard dimension, as they may cause damage
to the inside of the TV set.
For wall mounts that do not comply with the VESA standard screw specications,
the length of the screws may differ depending on their specications.
Do not use screws that do not comply with the VESA standard screw specications.
Do not fasten the screws too strongly, this may damage the product or cause the
product to fall, leading to personal injury.Samsung is not liable for these kinds of
accidents.
Samsung is not liable for product damage or personal injury when a non-VESA
or non-specied wall mount is used or the consumer fails to follow the product
installation instructions.
Our 57” and 63” models do not comply with VESA Specications. Therefore, you
should use our dedicated wall mount kit for this model.
Do not exceed 15 degrees tilt when mounting this TV.
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric
shock.
➣
➣
➣
➣
➣
➣
➣
➣
15~19mm
BN68-01691A-Eng_2.indd 140 2008-07-24 �� 12:33:40