Filter
Top Products
Chapter 4 Adjustments and Settings for Recording 4-39
4
4-6 Setup Menu Display on
the Viewfinder Screen
If the MENU ON/OFF/PAGE switch is set to ON, the setup menu is
displayed on the viewfinder screen.
Use this setup menu to select settings and also to select which items are
displayed on the viewfinder screen as well as how they are displayed.
4-6-1 Setup Menu Configuration
The setup menu is displayed as individual pages. The pages that make up
the setup menu and brief details of the function of each page are listed in
the table below.
You can change the configuration of the setup menu to suit your
requirements. At the factory, the pages marked with the a) in the table
are available.
Pages and functions of the setup menu
a) At the factory, the setup menu consists of these pages.
Page
number
Page name Function Reference
1
a)
MARKER
1/3
Sets markers (center
marker and safety zone
marker).
Section 4-8-4 “Setting
the Marker Display”
2 MARKER
2/3
Sets markers (box
cursor).
Maintenance Manual
3 MARKER
3/3
Sets the output of the
markers
Maintenance Manual
4
a)
VF DISP
1/2
Selects the viewfinder
screen display, the
extender display, and
the zoom position
display.
Section 4-8-2
“Selecting the Display
Items”
(Continued)