Filter
Top Products
Chapter 4 Adjustments and Settings for Recording 4-63
4
Changing the display mode
The currently set display mode appears on the VF DISP page of the setup
menu. Follow the procedure below to change it.
Changing the display mode
1 Follow steps 1 to 3 in Section 4-8-2 “Selecting the Display Items”
(page 4-58), until the VF DISP 1/2 page of the setup menu is on the
viewfinder screen and the cursor is at DISP MODE.
2 Press the rotary encoder so that a question mark appears to the left of
the display mode indication, then turn the rotary encoder to change
the display mode selection.
3 When the setting is completed, press the rotary encoder.
The question mark to the left of the display mode indication
disappears.
4 To end the menu operation, set the MENU ON/OFF/PAGE switch to
OFF.
1,4
2,3
1