Samsung DVW-707/707P Camcorder User Manual


 
Chapter 4 Adjustments and Settings for Recording 4-51
4
Select whether the indicator is to light for each of the following item
conditions.
When the WHITE BAL switch is at PRST
When the SHUTTER selector is at ON
When the FILTER selector is set to anything but 1
When the lens extender is in use
When the ATW function is working
The display for setting the status disappears from the viewfinder
screen, and the page that was on the screen when the last menu
operation ended appears.(When this menu is first used, the lowest-
numbered page of the currently selected pages for configuring the
menu appears.)
2 Push the MENU ON/OFF/PAGE switch repeatedly to PAGE until
the ‘!’ LED page shown below appears (or use the rotary encoder).
‘!’ LED page (factory settings)
3 Push the MENU CANCEL/PRST/ITEM switch repeatedly to ITEM
until the cursor reaches the desired item (or use the rotary encoder).
(When the CC filter selector is set to
anything but ND:1/CC:B)
1)
When the gain is set to anything but 0 dB
When the reference value of the
automatic iris adjustment is anything
but the standard value
1) DVW-709WS/709WSP/790WS/790WSP only
?E10*! LED?E10*! LED
GAIN : ON GAIN : ON
SHUTTER ON : ON SHUTTER ON : ON
WHITE PRESET : OFF WHITE PRESET : OFF
ATW RUN : OFF ATW RUN : OFF
EXTENDER ON : ON EXTENDER ON : ON
FILTER 2,3,4 : OFF FILTER 2,3,4 : OFF
FILTER A,C,D : OFF FILTER A,C,D : OFF
A.IRIS OVERRIDE: OFF A.IRIS OVERRIDE: OFF
(Continued)