Samsung DVW-707/707P Camcorder User Manual


 
Chapter 5 Setting Up the Camcorder 5-27
5
6 Connect the microphone cable to the AUDIO IN connector for
channel 1 or 2. Set the corresponding AUDIO IN switch to REAR.
Set the LINE/MIC/+48 V ON selector to +48 V ON or MIC in
accordance with the type of the microphone power supply.
Notes
You can only connect an external power supply type microphone to the
MIC IN connector.
If the microphone you connect to the AUDIO IN CH-1/CH-2
connector is of the external power supply type, set the appropriate
LINE/MIC/+48 V ON selector to +48 V ON.
Otherwise, set the selector to MIC.