Samsung DVW-707/707P Camcorder User Manual


 
Chapter 4 Adjustments and Settings for Recording4-60
4
VF DISP 2/2 page (factory settings)
3 Push the MENU CANCEL/PRST/ITEM switch repeatedly to ITEM
until the cursor reaches the desired item (or use the rotary encoder).
4 Turn the rotary encoder to select whether the selected item should
appear in the viewfinder display (the “ON” setting), or not appear
(the “OFF” setting).
Note that pushing the MENU CANCEL/PRST/ITEM switch to
CANCEL/PRST on this page has no effect.
To turn the setting of another item ON or OFF, repeat steps 3 and 4.
5 To end the menu operation, return the MENU ON/OFF/PAGE
switch to OFF.
The setup menu disappears from the viewfinder screen and the
display indicating the current status of the camcorder appears along
the top and bottom of the viewfinder screen (when the viewfinder
DISPLAY switch is set to ON).
Filter indicator
White balance memory indicator
Gain indicator
Shutter speed/mode indicator
Remaining tape indicator
Iris opening indicator
Monitor audio level indicator
?E05*VF DISP 2/2?E05*VF DISP 2/2
FILTER : ON FILTER : ON
WHITE : ON WHITE : ON
GAIN : ON GAIN : ON
SHUTTER : ON SHUTTER : ON
AUDIO : ON AUDIO : ON
TAPE : ON TAPE : ON
IRIS : ON IRIS : ON