Samsung DVW-707/707P Camcorder User Manual


 
Chapter 4 Adjustments and Settings for Recording4-94
4
2 Push the MENU ON/OFF/PAGE switch repeatedly toward PAGE
(or press the rotary encoder) until the OFFSET WHT page (shown
below) appears.
3 Set the WHITE BAL switch to channel A or B.
Note
If the WHITE BAL switch is not set to A or B when you operate the
camcorder, the adjustment value will not be reflected in the output
signal.
4 Push the MENU CANCEL/PRST/ITEM switch repeatedly toward
ITEM (or turn the rotary encoder) until the cursor specifies the item
you want to change.
5 Turn the rotary encoder to change the setting of the selected
function, as follows.
OFFSET WHITE<A>: Turns the setting of the offset for channel A
ON or OFF.
WARM-COOL<A>: While looking at the image, adjust channel A
by turning the rotary encoder towards + (to produce a warm
image) or towards – (for a cool image).
FINE<A>: Adjusts the value more precisely if the adjustment by
WARM-COOL<A> is not satisfactory.
E34*OFFSET WHT E34*OFFSET WHT
pOFFSET WHITE<A>:? ONOFFSET WHITE<A>:? ON
WARM-COOL <A>: 0 WARM-COOL <A>: 0
FINE <A>: 0 FINE <A>: 0
OFFSET WHITE<B>: OFF OFFSET WHITE<B>: OFF
WARM-COOL <B>: 0 WARM-COOL <B>: 0
FINE <B>: 0 FINE <B>: 0