Filter
Top Products
Operating the Camera
Using the Trigger Button
26
The current specified position appears on the monitor
screen.
Using the Trigger Button
You can execute various functions by clicking their
respective buttons on the Trigger panel.
Sending a monitor image via e-mail
You can send a captured still image by attaching it to an
e-mail.
To use this function, you need to make e-Mail (SMTP)
active and set the address in the Trigger menu of the
Administrator menu properly (page 88).
1
Click e-Mail (SMTP) on the Trigger panel.
The still image of the moment you click is captured,
and your e-mail with the image file attached is sent
to the specified mail address.
Sending a monitor image to an FTP
server
You can send a captured still image to the FTP server.
To use this function, you need to make FTP active and
set the address in the Trigger menu of the Administrator
menu properly (page 88).
1
Click FTP client on the Trigger panel.
The still image of the moment you click is captured,
and the image file is sent to the FTP server.
Recording a camera image as a still
image
You can capture a camera image as a still picture and
record it.
SNC-DH240/DH140/DH180/CH280 can record images
in its built-in memory or CF memory card (not
supplied). SNC-DH240/DH140/DH180/DH280 can
only record images in its built-in memory.
To use this function, you need to make Image memory
active and set the details in the Trigger menu of the
Administrator menu (page 88).
1
Click Image memory on the Trigger panel.
The still image of the moment you click is captured,
and the image file is recorded.