Sony DH240 Security Camera User Manual


 
Administrating the Camera
Configuring the Network — Network Menu
51
Wireless Tab — Setting of wireless
connection (SNC-CH240/CH140/
CH180/CH280 only)
Insert the specified wireless card into the CF card slot of
the camera, and set the items for connecting to the
wireless network.
Before setting, read the operation manual and
installation manual supplied with the wireless card
together with this guide.
Verified wireless cards
Sony Wireless Card SNCA-CFW5* sold separately.
* SNCA-CFW5 is not available in some countries and
areas. For details, contact your authorized Sony
dealer.
Notes
Before inserting or removing the wireless card from
the camera, turn off the power of the camera.
The throughput of data transmission/reception via the
network cable may decrease when the wireless card is
in use.
Not available for SNC-CH180/CH280 when powered
by PoE.
MAC address
Displays the MAC address of the wireless card inserted
in to the CF card slot.
If a wireless card is not inserted, “00:00:00:00:00:00”
will be displayed.
IPv4 setting
Configure the IPv4 network setting.
IP address
Configure the IP address for a wireless network.
Obtain an IP address automatically (DHCP): Select
this option when a DHCP server is installed on the
network to allow IP address assignment. With this
setting, the IP address is assigned automatically.
Use the following IP address: Select this option when
you set a fixed IP address. With this setting, specify
the IP address, Subnet mask and Default gateway
manually.
Note
When you select Obtain an IP address automatically
(DHCP), make sure that a DHCP server is operating on
the network.
IP address
Type the IP address of the camera.
Subnet mask
Type the subnet mask.
Default gateway
Type the default gateway.
DNS server
Configure the DNS server address.
Obtain DNS server address automatically: Select this
option to obtain the address of the DNS server
automatically. This can be set only when Obtain an
IP address automatically (DHCP) is selected in the
Wireless tab.
Use the following DNS server address: Select this
option when you set a fixed address as the IP address
of the DNS server. With this setting, specify the
addresses on Primary DNS server and Secondary
DNS server manually.
Note
When you select Obtain DNS server address
automatically, make sure that a DHCP server is
operating on the network.
Primary DNS server
Type the IP address of the primary DNS server.