Open as PDF
Administrating the Camera
Sending an Image via E-mail — e-Mail (SMTP) Menu
Sending an Image via
— e-Mail (SMTP) Menu
When you click in the Administrator
menu, the e-Mail (SMTP) menu appears.
Using the e-Mail (SMTP) function, you can send an
e-mail with an attached image file that has been shot
linked with an external sensor input or with the built-in
detection functions. An image file can also be sent
The e-Mail (SMTP) menu consists of three tabs:
Common, Alarm sending and Periodical sending.
Common Tab — Setting the e-Mail
Select On when you use the e-Mail (SMTP) function.
• You cannot send an audio file by using the e-mail
• The frame rate and operability on the main viewer
may be reduced while a file is being transmitted by the
e-Mail (SMTP) function.
SMTP server name
Type the SMTP server name using up to 64 characters,
or the IP address of the SMTP server.
SMTP port number
Enter a port number from 25 to 65535.
The standard port number is 25. If TLS is enabled, the
standard port number for SMTPs is 465.
To use the encryption function by TLS, select On.
The model on sale in China does not support the TLS
To use the encryption function by STARTTLS, select
The model on sale in China does not support the
Select whether authentication is required when you send
Off: No authentication is required when an e-mail is
On: Authentication is required when an e-mail is sent.
Select one of the authentication methods from the
following and specify the POP server name, User
name and Password as required.
SMTP: Select when SMTP authentication is
POP before SMTP: Select when POP before SMTP
authentication is required.
When you set Authentication to On, be sure to select
either or both SMTP or/and POP before SMTP.
Select POP3 or APOP as the authentication method for
The model on sale in China does not support the APOP
Wait time after POP
Set the waiting time in POP before SMTP before
SMTP authentication after POP authentication is
completed. Timeout can be set from 0 to 10,000 msec.
POP server name
This is necessary when POP before SMTP is selected
Type the POP (receiving mail) server name using up to
64 characters, or type the IP address of the POP server.
This setting is necessary when the SMTP server that
sends e-mails performs authentication using the POP