Sony DH240 Security Camera User Manual


 
Administrating the Camera
Setting the Camera Image and Audio — Camera Menu
40
Setting the Camera
Image and Audio
— Camera Menu
When you click in the Administrator menu, the
Camera menu appears.
Use this menu to set the functions of the camera.
The camera menu consists of the following 7 tabs.
SNC-CH240/CH140: Common, Focus, Picture,
Privacy masking, Day/Night, Video codec, and
Streaming.
SNC-CH180/CH280/DH140/DH180/DH240/DH280:
Common, Focus/Zoom, Picture, Privacy masking,
Day/Night, Video codec, and Streaming.
Common Tab
Color
Select Color or Monochrome for the image.
Audio codec
Select whether you are going to send audio from the m
microphone input connector. Select On to send the
audio from the network camera.
Note
When you change the Audio codec setting, click
Refresh on the Web browser to reflect the change on the
opening main viewer page.
Audio in
Select microphone input or line input.
Mic volume
When the Audio in is set to microphone input, set the
volume level of the audio input from the m microphone
input connector. It is adjustable from –10 to +10.
Codec
Select the bit rate of audio from the m microphone input
connector. G.711 (64kbps), G.726 (40kbps), G.726
(32kbps), G.726 (24kbps) or G.726 (16kbps) can be
selected.
Note
No audio is output if JPEG or JPEG/FLASH is used for
the Plug-in free viewer.
Echo canceler
Select On to reduce echo from audio transmission.
Ambient noise filter
Select On to activate the Ambient noise filter.
Dynamic range compressor
Select On to activate the Dynamic range compressor.
Audio upload
Using SNC audio upload tool stored in the supplied
CD-ROM, you can output audio that is input to the
computer’s audio input terminal from a powered speaker
connected to the line output jack of the camera.
Select On to output audio from the speaker.
Volume
Set the speaker volume level from – 10 to + 10.
OK/Cancel
See “Buttons common to every menu” on page 32.
Focus tab — Adjusting the Focus
(SNC-CH240/CH140 only)
Adjust the focus by moving the flange back position of
the imaging device.
Camera