Filter
Top Products
123
“Memory Stick
” Operations
Recording superimposed images on a “Memory Stick” as a still
image
Image size is automatically set to 640 × 480.
Before operation
Insert a “Memory Stick” including still images into your camcorder.
(1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to
the left (unlock) position.
(2) Press MEMORY MIX.
The last recorded or composed image appears on the lower part of the screen.
(3) Press MEMORY –/+ to select the image you want to superimpose.
MEMORY – : To display the previous image
MEMORY + : To display the following image
(4) Select the desired mode with the SEL/PUSH EXEC dial.
The mode changes as follows:
M. CHROM y M. LUMI y C. CHROM
(5) Press the SEL/PUSH EXEC dial.
The still image is superimposed on the moving picture.
(6) Turn the SEL/PUSH EXEC dial to adjust the effect.
M. CHROM – Blue chroma key (blue background) to extract a still image
and superimpose it on a moving picture
M. LUMI – Brightness level used when extracting a still image and
superimposing it on a moving picture
C. CHROM – Blue chroma key (blue background) to extract a moving
picture and superimpose it on a still image
The fewer bars there are on the screen, the stronger the effect.
(7) Press PHOTO deeper to start recording.
The image displayed on the screen will be recorded on a “Memory Stick.”
Recording is complete when the bar scroll indicator disappears.
Superimposing a still image in the “Memory Stick” on an image
– MEMORY MIX