Sony DCR-TRV16, DCR-TRV18, DCR-TRV25, DCR-TRV27 Camcorder User Manual


 
162
Connecting your camcorder to your computer using the USB cable
For Windows users
If you cannot install the USB driver
The USB driver has been registered incorrectly as your computer was connected to your
camcorder before installation of the USB driver was completed. Perform the following
procedure to correctly install the USB driver.
Viewing images recorded on a tape
Step 1: Uninstall the incorrect USB driver
1 Turn on your computer and allow Windows to load.
2 Connect the AC power adaptor, and set the POWER switch to VCR.
3 Connect the USB jack on your computer to the
(USB) jack on your camcorder
using the USB cable supplied.
4 Open your computers Device Manager.
Windows XP Home Edition/Professional:
Select Start t Control Panel t System t Hardware, and click the
Device Manager button.
If there is no System inside Pick a category after clicking Control Panel,
click Switch to classic view instead.
Windows 2000 Professional:
Select My Computer t Control Panel t System t Hardware tab,
and click the Device Manager button.
Windows 98SE/Windows Me:
Select My Computer t Control Panel t System, and click Device
Manager.
5 Select and delete the underlined devices.
Windows 98SE Windows Me