Filter
Top Products
43
Advanced Recording Operations
– Except DCR-TRV16
You can record still images on a “Memory Stick” in the tape recording or standby
mode. You can also record still images on a tape (p. 46).
Before operation
•Insert a “Memory Stick” into your camcorder (p. 106).
•Set PHOTO REC in to MEMORY in the menu settings. (The default setting is
MEMORY.)
(1) In the standby mode, keep pressing PHOTO lightly until a still image appears.
The CAPTURE indicator appears. Recording does not start yet. To change the
still image, release PHOTO, select a still image again, and then press and hold
PHOTO lightly.
(2) Press PHOTO deeper.
Recording is complete when the bar scroll indicator disappears.
The image when you pressed PHOTO deeper will be recorded on the
“Memory Stick.”
— Advanced Recording Operations —
Recording still images on a “Memory
Stick” during recording on a tape
1
2
PHOTO
PHOTO
1 / 12
SFN
640
SFN
640
CAPTURE
50min
50min
[a]: Number of recorded images
[b]: Approximate number of images that
can be recorded on the “Memory
Stick”
[a][b]