Sony DCR-TRV16, DCR-TRV18, DCR-TRV25, DCR-TRV27 Camcorder User Manual


 
159
Viewing Images Using Your Computer
Installing the USB driver
Start the following operation without connecting the USB cable to your
computer.
Connect the USB cable according to Making the computer recognize the
camcorder.
If you are using Windows 2000 Professional or Windows XP Home Edition/
Professional, log in with permission of Administrators.
(1) Turn on your computer and allow Windows to load.
(2) Insert the supplied CD-ROM in the CD-ROM drive of your computer. The
application software starts up and the title screen appears.
(3) Move the cursor to USB Driver and click. This starts USB driver installation.
(4) Follow the on-screen messages to install the USB driver.
(5) Remove the CD-ROM and then restart the computer, in accordance with the
instructions on the screen.
Note
If you connect the USB cable before USB driver installation is complete, the USB driver
will not be properly registered. Carry out installation again in accordance with the steps
on page 162.
Windows XP Home Edition/Professional users
If you go to USBCONNECT in the menu settings and select PTP, you can copy
Memory Stick images from the camcorder onto your computer without installing the
USB driver. This is ideal for simply copying images from a camcorder onto a computer.
Refer to page 183 for details.
Connecting your camcorder to your computer using the USB cable
For Windows users