Sony DCR-TRV16, DCR-TRV18, DCR-TRV25, DCR-TRV27 Camcorder User Manual


 
38
You can monitor the playback picture on the screen. If you close the LCD panel, you can
monitor the playback picture in the viewfinder. You can control playback using the
Remote Commander supplied with your camcorder.
(1) Prepare the power supply and insert the recorded tape.
(2) Set the POWER switch to VCR while pressing the small green button.
(3) Open the LCD panel while pressing OPEN.
(4) Press m to rewind the tape.
(5) Press N to start playback.
(6) To adjust the volume, press either of the two buttons on VOLUME. Sound is
muted when the LCD panel is closed.
: To turn the volume down
+: To turn the volume up
To stop playback
Press x.
When monitoring on the LCD screen
You can turn the LCD panel over and move it back to the camcorder body with the
LCD screen facing out.
If you leave the power on for a long time
Your camcorder gets warm. This is not a malfunction.
When you open or close the LCD panel
Make sure that the LCD panel is set vertically.
Playback Basics
Playing back a tape
4
2
5
6
1
3
VOLUME
VCR
MEMORY
CAMERA
OFF(CHG)
P
O
W
E
R
PLAYREW