Filter
Top Products
140
– Except DCR-TRV16
You can play back moving pictures recorded on a “Memory Stick.” You can also play
back six images including still images in order at a time by selecting the index screen.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY or VCR. Make sure that the LOCK switch
is set to the left (unlock) position.
(2) Press MEMORY PLAY. The last recorded image is displayed.
(3) Press MEMORY –/+ to select the desired moving pictures.
MEMORY – : To display the previous image
MEMORY + : To display the following image
(4) Press MPEG N X or SEL/PUSH EXEC dial to start playback.
(5) To adjust the volume, press either of the two buttons on VOLUME.
– : To turn the volume down
+: To turn the volume up
To stop MPEG movie playback
Press MPEG N X or SEL/PUSH EXEC dial.
Note
You may not be able to play back images properly in the following cases:
– When playing back on your camcorder image data modified on your computer
– When playing back image data on other equipment.
To play back recorded pictures on a TV screen
•Before operation, connect your camcorder to the TV with the A/V connecting cable
supplied with your camcorder.
•Turn the audio volume of the TV down before operation, or noise (howling) may be
output from the TV speakers.
When no image is recorded on the “Memory Stick”
The message “ NO FILE” appears.
Viewing moving pictures
– MPEG movie playback
1
3
2
PLAY
4
MPEG
LOCK
VCR
MEMORY
CAMERA
OFF(CHG)
POWER