Filter
Top Products
189
Troubleshooting
Types of trouble and how to correct trouble
Symptom Cause and/or Corrective Actions
• The write-protect tab on the “Memory Stick” is set to
LOCK.
c Release the lock. (p. 105)
• The image to write a print mark is not played back.
c Press MEMORY PLAY to play back the image. (p. 137)
• You are trying to write a print mark on a moving picture.
c Print marks cannot be written on a moving picture.
• The write-protect tab on the “Memory Stick” is set to
LOCK.
c Release the lock. (p. 105)
• You may not be able to play back images in actual size
when you try to play back images recorded by other
equipment. This is not a malfunction.
• Your camcorder cannot play back some images processed
with a computer (The file name will blink).
• If you record images with any other equipment, the
images may not play back normally on your camcorder.
Others
Symptom Cause and/or Corrective Actions
• The cassette has no cassette memory.
c Use a cassette with cassette memory. (p. 98)
• The cassette memory is full.
c Erase unwanted title. (p. 100)
• The cassette is set to prevent accidental erasure.
c Slide the write-protect tab so that red portion is not
visible. (p. 25)
• The tape has a blank portion between recorded portions.
c Superimpose the title to a recorded portion. (p. 98)
• The cassette has no cassette memory.
c Use a cassette with cassette memory. (p. 103)
• The cassette memory is full.
c Erase unwanted titles. (p. 100)
• The cassette is set to prevent accidental erasure.
c Slide the write-protect tab so that red mark is not visible.
(p. 25)
• The input selector on the VCR is not set correctly.
c Check the connection and set the input selector on the
VCR again (p. 78)
• The camcorder is connected to DV equipment of other
than Sony using the i.LINK cable (DV connecting cable).
c Set it to IR (p. 83).
• Setting program on a blank portion of the tape is
attempted.
c Set the program again on a recorded portion (p. 86).
• The camcorder and the VCR are not synchronized.
c Adjust the synchronization (p. 84).
• The IR SETUP code is incorrect.
c Set the correct code (p. 79).
(continued on the following page)
You cannot write a print mark on
the still image.
The photo save function does not
work.
You cannot play back images in
actual size.
You cannot play back image data.
The title is not recorded.
The cassette label is not recorded.
Digital program editing to a tape
does not function.