Filter
Top Products
22
Connecting to a wall outlet
When you use your camcorder for a long time, we recommend that you power it from a
wall outlet using the AC power adaptor.
(1) Open the DC IN jack cover. Connect the AC power adaptor supplied with
your camcorder to the DC IN jack on your camcorder with the plug’s v mark
facing up.
(2) Connect the power cord to the AC power adaptor.
(3) Connect the power cord to a wall outlet.
PRECAUTION
The set is not disconnected from the AC power source (wall outlet) as long as it is
connected to the wall outlet, even if the set itself has been turned off.
Notes
•The AC power adaptor can supply power even if the battery pack is attached to your
camcorder.
•The DC IN jack has “source priority.” This means that the battery pack cannot supply
any power if the AC power adaptor is connected to the DC IN jack, even when the
power cord is not plugged into a wall outlet.
Using a car battery
Use a Sony Car Battery Adaptor (optional). Refer to the operating instructions of the
Car Battery Adaptor for further information.
Step 1 Preparing the power supply
2, 3
1