Filter
Top Products
36
Self-timer recording
– Except DCR-TRV16
Recording with the self-timer starts in 10 seconds automatically. You can also use the
Remote Commander for this operation.
(1) In the standby mode, press MENU, then select SELFTIMER in with the
SEL/PUSH EXEC dial (p. 177).
(2) Turn the SEL/PUSH EXEC dial to select ON, then press the dial.
(3) Press MENU to make the menu settings disappear.
The
(self-timer) indicator appears on the screen.
(4) Press START/STOP.
Self-timer starts counting down from 10 with a beep. In the last two seconds of
the countdown, the beep gets faster, then recording starts automatically.
To stop the countdown
Press START/STOP.
To restart the countdown, press START/STOP again.
To cancel self-timer
Set SELFTIMER to OFF in the menu settings in the standby mode.
You cannot cancel self-timer using the Remote Commander.
Note
The self-timer is automatically canceled when:
– Self-timer recording is finished.
– The POWER switch is set to OFF (CHG) or VCR.
When the POWER switch is set to MEMORY
You can also record still images on “Memory Stick”s with the self-timer (p. 116).
Recording a picture
2
CAMERA SET
SELFTIMER
D ZOOM
PHOTO REC
16
:
9WIDE
STEADYSHOT
FRAME REC
INT. REC
RETURN
OFF
ON
[
MENU
]
:
END
1,3 MENU
START/STOP
4 START/STOP