Filter
Top Products
108
Warning/Error Messages
Appendixes
Warning/Error Messages
If battery power is low or a problem occurs at power on or
during operation, a warning is given by an indicator
flashing or various alarm indications.
Viewfinder screen Subdisplay RUN
indicator
Meaning
Basic status
display (page 43)
Message
BATT 12 V flashing BATT 12 V flashing Flashing Voltage of the 12 V power becomes low,
reaching the specified NEAR END value.
BATT 12 V quick
flashing
BATT 12 V quick
flashing
Quick
flashing
Voltage of the 12 V power becomes too
low, reaching the specified END value.
BATT 24 V flashing BATT 24 V flashing Flashing Voltage of the 24 V power becomes low,
reaching the specified NEAR END value.
BATT 24 V quick
flashing
BATT 24 V quick
flashing
Quick
flashing
Voltage of the 24 V power becomes too
low, reaching the specified END value.
TEMPERATURE CARE Temperature inside the camera raises.
TEMPERATURE
WARNING
Temperature inside the camera raises to
the limit.
SHUTDOWN CAMERA The camera must be turned off for safety.
OHB/SIDE FAN NG! The fan near the CCD or the fan near the
side panel stops.
PS FAN NG! The fan near the power unit stops.
CAM? OHB NG! Abnormality of the CCD unit
CAM? AD BOARD NG! Abnormality of the AD board
CAM? DPR BOARD NG! Abnormality of the DPR board
CAM? VDA BOARD NG! Abnormality of the VDA board
CAM? TR BOARD NG! Abnormality of the TR board
CAM? AT BOARD NG! Abnormality of the AT board
I/F BOX NG! Quick
flashing
An unknown interface box is connected.
UNKNOWN RECORDER Quick
flashing
An unknown recorder is connected.
VTR ALARM Alarm occurs at the SRW-1.
VTR WARNING Warning occurs at the SRW-1.