Filter
Top Products
48
Detailed Settings of the Switch Functions
Chapter 3 Basic Adjustments and Settings
3-7 Detailed Settings of
the Switch Functions
By using the <SWITCH ASSIGN> page of the USER
(OPERATION) menu displayed on the viewfinder/monitor
screen, the operation mode of the MENU SEL/ENTER
dial in addition to function assignment to the assignable
buttons/switch that can also be made on the subdisplay.
<SWITCH ASSIGN> page
Assigning functions to the assignable
buttons/switch
When you position the pointer to any of the ASSIGN SW1
to ASSIGN SW4 lines and push on the MENU SEL/
ENTER dial, the subpage to set the corresponding button/
switch is displayed.
You can assign the same functions as those when you
operate the subdisplay.
For the assignable functions, see “3-2-10 Allocation of
Functions to the Assignable Buttons and Switch” (page
35).
Setting subpage for assignable button 1
The setting subpages for button 2 and 3 have the same
layout as that for button 1.
Setting subpage for assignable switch 4
Position the pointer to the function to be assigned and push
on the MENU SEL/ENTER dial.
Setting the operation mode of the MENU
SEL/ENTER dial
You can reverse the operation corresponding to the
directions of rotation of the MENU SEL/ENTER dial on
the camera head and that on the assistant panel.
<SWITCH ASSIGN> U13
ASSIGN SW1 :
B
OFF
ASSIGN SW2 : OFF
ASSIGN SW3 : OFF
ASSIGN SW4 : OFF
RE_ROTATION: STD
ASSIGN SW1 ESC
B
OFF
ND
REC REVIEW
PB(VF)
VF709GAM
MONI709GAM
FAN MODE
GAIN -9/-18dB
Setting Operation
STD (default) Clockwise rotation moves the pointer/
cursor down or increases values on a
menu/subdisplay page.
RVS Clockwise rotation moves the pointer/
cursor up or decreases values on a menu/
subdisplay page.
ASSIGN SW4 ESC
B
OFF
AWB
BARS
TEST1