Filter
Top Products
44
Viewing and Setting the Viewfinder Displays
Chapter 3 Basic Adjustments and Settings
Setting the basic status indications
The conditions for displaying the basic status indications
can be set on the <VF DISPLAY> page of the USER
(OPERATION) menu.
<VF DISPLAY> page
3-6-2 Viewing the ABNORMAL <!>
Display
Pressing the CANCEL/STATUS button calls the following
ABNORMAL< ! > display, permitting you to check the
items for which the setting is not in the normal condition.
The display conditions can be set using the < ' ! ' IND>
page of the USER (OPERATION) menu.
Setting the ABNORMAL<!> indications
Set the conditions for the abnormal indications on the
< ' ! ' IND> page of the USER (OPERATION) menu.
<' ! ' IND> page
Indication of each item on the ABNORMAL< ! > display
is turned on or off in the [IND] column.
Set the normal condition for each item in the [NORMAL]
column.
If an item for which [IND] is set to ON becomes a
condition other than that specified in the [NORMAL]
column, the condition is indicated on the < ' ! ' IND> page.
3-6-3 Viewing the FUNCTION
(Format/Switch Function) Display
If you press the CANCEL/STATUS button with the
ABNORMAL< ! > display on the screen, the display
changes to the following FUNCTION display:
Item Setting
FPS Set to ON to obtain the frame rate indication
1.
ND Set to ON to obtain the optical filter
indications 5.
5600K Set to ON to obtain the 5600 indication 4.
WHITE Set to ON to obtain the white balance
memory indication 3.
GAIN Set to ON to obtain the gain value indication
6.
SHUTT Set to ON to obtain the shutter indication 7.
UNIT Select the unit for the shutter indication.
deg: Shutter angle (Default)
sec: Shutter speed
BATT12 Set to ON to obtain the battery indications 2.
BATT24
REC Set to ON to obtain the recording mode
indication 9.
TAPE Set to ON to obtain the tape remaining
indication 8.
TC Set to ON to obtain the time code indication
qs.
MESSAG Select the type of messages to be displayed
in the message area qa.
ALL: To display all messages
AT: To display Auto Setup information and
higher
WRN: To display warning messages and
higher
OFF: To display warning messages of the
highest level only
<VF DISPLAY> U01
FPS :
B
ON GAIN : ON
ND : ON SHUTT : ON
5600K : ON UNIT : deg
WHITE : OFF BATT12: OFF
BATT24: OFF
REC : OFF
TAPE : OFF
TC : OFF
MESSAG: ALL
Item Setting
ND ND filter selection:
1, 2, 3, 4, 5 (combination allowed)
WHITE White balance memory selection:
P, A, B (combination allowed)
5600K Custom mode: 5600K ON/OFF
Cine mode: ON for Daylight, OFF for Tungsten
SHUTT Shutter mode ON/OFF
FAN Fan rotation mode selection:
AUTO1, AUTO2, MIN or MAX
G-COMP Gain compensation mode (normal: OFF)
ABNORMAL<!>
!ND :1
!WHITE :A
!5600K :OFF
!SHUTT :360.0deg
!FAN : MAX
!G-COMP :ON
<'!'IND> U02
[IND] [NORMAL]
ND :
B
ON 1----
WHITE : ON P--
5600K : ON OFF
SHUTT : ON OFF
FAN : ON AUTO1
G-COMP: ON