Filter
Top Products
92
File Operations
Chapter 5 Storage and Retrieval of User Setting Data
1
Insert the “Memory Stick” into the “Memory Stick”
slot of the camera.
2
Position the pointer to READ (MS t CAM) and push
on the MENU SEL/ENTER dial.
The camera will be set according to the data loaded from
the operator file.
To return the operator file items to the
factory-set values
Position the pointer to PRESET and push on the MENU
SEL/ENTER dial.
You can also use the <FILE PRESET> page (page 95) of
the FILE menu for this purpose.
5-3-3 Registration and Retrieval of
the Lens Files
The registered lens files can be retrieved via the subdisplay
or the <LENS FILE> page of the OPERATION menu.
To register the data you adjusted for the mounted lens as a
lens file, or to use a “Memory Stick,” the <LENS FILE>
page of the FILE menu is used.
To store the data as a lens file in built-in
memory
Perform necessary settings for the items marked with “a”
in the L column of the table in “5-2 List of Items Stored in
Files” for the lens file you wish to store.
1
Select the file number, and set the file name.
For setting of file names, see “Specifying a character
string” (page 59).
2
Position the pointer to STORE FILE and push on the
MENU SEL/ENTER dial.
Storage of the position settings for the center marker can
be independently performed.
You can confirm the effect of the WHITE R/B
compensation that has been set in the file, by changing the
setting for WHITE R/B to OFF.
The WHITE R/B item is provided only for confirming the
effect of compensation (comparison between when the file
is used and not used). The file cannot be stored with
WHITE R/B set to OFF.
To store in or retrieve from a “Memory
Stick”
Position the pointer to LENS MS READ/WRITE and push
on the MENU SEL/ENTER dial. The subpage will be
displayed.
To store
Position the pointer to WRITE (CAM t MS) then push
on the MENU SEL/ENTER dial.
You can add a comment (maximum: 14 characters) to the
lens file to be stored in the “Memory Stick” by specifying
it on the FILE ID line.
For details on how to enter a comment, see “Specifying a
character string” (page 59).
To retrieve
Position the pointer to READ (MS t CAM) then push on
the MENU SEL/ENTER dial.
5-3-4 Storage and Retrieval of the
Scene Files
Use the <SCENE FILE> page of the FILE menu. The
<SCENE FILE> page is also included in the PAINT menu.
The operation method is the same.
<LENS FILE> F05 TOP
c
STORE FILE
No. : 1
NAME: No Offset
CENTER H : 0
V : 0 STORE
WHITE R/B: ON
LENS MS READ/WRITE
Note
<LENS FILE> ESC
READ (MS
t
t
CAM)
WRITE (CAM
t
MS )
FILE ID:
CAM CODE
DATE
<SCENE FILE> F02 TOP
1 2 3 4 5 STORE
--
STANDARD
READ (MS pCAM)
WRITE (CAMpMS )
FILE ID:
CAM CODE
DATE